When setting up an Axis security camera for the first time, it is essential to know the default IP address and Axis Camera Default Password. In this guide, we’ll walk you through everything you need to know to quickly access your Axis camera settings and get started with your surveillance system.
✅ Default IP Address of Axis Cameras
Most Axis cameras do not come with a fixed IP address by default. Instead, they use Dynamic Host Configuration Protocol (DHCP) to automatically get an IP address from your network.
If there’s no DHCP server, the camera usually defaults to:
- 169.254.x.x (Link-local address)
To find the camera’s IP:
- Use the AXIS IP Utility Tool (free from the Axis website)
- Or check your router’s connected devices list
Axis cameras previously used a default login:
🔐 Axis Camera Default Password and Username
- Username:
root - Password:
pass(or blank in older models)
However, Axis has updated its security policy:
⚠️ There is no Axis Camera default password on most newer Axis models. You must set a password during initial setup.
If you’re unsure, reset the camera to factory settings and follow the setup steps using Axis tools like:
- AXIS Device Manager
- Camera’s web interface
🔄 How to Reset Axis Camera to Factory Settings
If you’ve lost access or want to start fresh:
- Press and hold the control/reset button on the camera.
- Hold for about 15-30 seconds until the LED indicators flash.
- The camera will reset and reboot with default settings.
🛠️ Tools to Use for Configuration
- AXIS IP Utility – for detecting IP address
- AXIS Device Manager – for bulk configuration, firmware updates, and password management
❓Frequently Asked Questions (FAQs)
Q1: What is the default IP address of Axis cameras?
A: Most Axis cameras use DHCP. If no DHCP server is available, the camera may default to 169.254.x.x.
Q2: Is there a default password for Axis cameras?
A: Newer Axis cameras do not have a default password. You must set it during the first setup.
Q3: How do I find my Axis camera on the network?
A: Use the AXIS IP Utility or AXIS Device Manager to detect connected devices and IPs.
Q4: How can I reset an Axis camera?
A: Hold the reset button for 15–30 seconds until the camera restarts. This resets all settings.
Q5: Can I use the old login “root/pass”?
A: Only on older models. Modern Axis devices require you to create your password during setup.
🧠 Pro Tip:
To enhance security, always update your camera’s firmware and change the default login details after setup. Avoid using weak passwords like “123456” or “admin.”
📌 Final Words
Understanding the Axis camera default IP and login settings helps you streamline installation and improve your system’s security. Always refer to the user manual or Axis support if you’re unsure about your specific model.