UNV Camera Default IP, Login, Username & Password (2026 Guide)

UNV Camera Default IP, Login, Username & Password (2026 Guide)

by

When setting up a CCTV system, accessing your camera is the first and most important step. If you’re using UNV (Uniview) cameras, knowing the default IP address helps you quickly configure and start monitoring.

In this guide, you’ll learn the UNV camera default IP, login details, setup steps, and troubleshooting tips—perfect for both beginners and CCTV installers.

⭐ What is UNV Camera Default IP?

The default IP address of UNV CCTV cameras is usually:

👉 192.168.1.13

This IP allows you to access the camera via a web browser or software during initial setup.

🔐 Default Username & Password

Here are the common default login details:

  • Username: admin
  • Password: 123456 (or set during first login in newer models)

⚠️ Important:
New UNV devices often require you to create a strong password at first login for security reasons.

⚙️ How to Log in to UNV Camera

Follow these simple steps:

🖥️ Step 1: Connect the Camera

  • Connect the camera to the router or switch using a LAN cable
  • Power ON the device

🌐 Step 2: Match Network Range

  • Set your computer IP like: 192.168.1.xxx
  • Example: 192.168.1.100

🔎 Step 3: Open Browser

🔑 Step 4: Login

  • Enter username & password
  • Access camera settings dashboard

📱 Alternative Access Methods

You can also access UNV cameras using:

  • 📲 Mobile App (EZView / UNV App)
  • 💻 VMS Software
  • 🌐 NVR Interface

👉 These tools can auto-detect cameras on the network.

🔄 How to Change UNV Camera IP

Changing IP helps avoid conflicts:

  1. Log in to the camera
  2. Go to Network Settings
  3. Change IP (e.g., 192.168.1.150)
  4. Save settings

👉 Use a static IP for a stable connection.

🚨 Troubleshooting (Fix Common Issues)

❌ Camera Not Opening

✔ Check cable connection
✔ Ensure same network range
✔ Disable firewall temporarily
✔ Use IP scanner tool

❌ Forgot Password

✔ Reset the camera using the reset button
✔ Use default credentials again
✔ Contact UNV support if needed

❌ IP Address Not Found

✔ Check router connected devices
✔ Use IP finder software
✔ Try different IP ranges

📈 Important Highlights

👉 Default IP of UNV camera is 192.168.1.13
👉 Default login: admin / 123456
👉 New models require password setup
👉 Always change the default password for security
👉 Use a static IP to avoid network conflicts

❓ Frequently Asked Questions (FAQ)

Q1. What is the default IP of the UNV camera?

👉 The default IP is 192.168.1.13

Q2. What is the default username and password?

👉 Username: admin
👉 Password: 123456

Q3. How can I find my UNV camera IP?

👉 Use IP scanner tools or check your router device list

Q4. Why is my UNV camera not opening?

👉 Possible reasons:

  • Wrong IP
  • Network mismatch
  • Connection issue

Q5. Can I change the UNV camera IP?

👉 Yes, from network settings

Q6. How to reset the UNV camera?

👉 Press and hold reset button for 10–15 seconds

🏁 Final Conclusion

Understanding the UNV camera default IP makes installation and troubleshooting much easier. By following this guide, you can quickly access your camera and ensure a secure setup.

For best performance:
✔ Change default password
✔ Assign static IP
✔ Keep firmware updated

Latest Post

Post Views: 8
     

Leave a Comment