When installing or configuring a CCTV camera system, one of the first steps is accessing the camera or DVR/NVR using the default login credentials and IP address. Each brand has its own set of factory defaults. This guide provides a quick reference for the top CCTV brands, their default usernames, passwords, and IP addresses to help both professionals and DIY users.
Why You Need to Know Default Login Info
- Helps in initial setup or reset
- Essential for troubleshooting
- Speeds up installation and testing
- Saves time on searching the brand documentation
Top CCTV Brands – Default Login Credentials & IP Address
| Brand | Default IP Address | Default Username | Default Password | Notes |
|---|---|---|---|---|
| Hikvision | 192.0.0.64 | admin | 12345 / none | Some require activation before login |
| Dahua | 192.168.1.108 | admin | admin | May ask to change on first login |
| CP Plus | 192.168.1.108 | admin | admin123 | Newer models may vary |
| Uniview (UNV) | 192.168.1.13 | admin | 123456 | Use the SADP tool for IP discovery |
| Bosch | 192.168.0.1 | service | service | Use Configuration Manager for access |
| Axis | DHCP or 192.168.0.90 | root | (no password) | The password must be changed at first login |
| TVT | 192.168.1.10 | admin | 123456 | Varies by model |
| Honeywell | 192.168.1.64 | admin | 1234 | Use SADP tool for IP discovery |
| ZKTeco | 192.168.1.2 | admin | admin | Often used in access control + CCTV |
| Vivotek | 192.168.1.30 | root | pass | Might differ based on camera series |
Important Security Tip
Always change the default username and password after setup to avoid unauthorized access.
Frequently Asked Questions (FAQ)
Why can’t I log in using default credentials?
Answer: Some brands require initial activation before allowing login, or the device may have been previously configured. Try resetting the device or using a brand-specific tool like Hikvision SADP or Dahua ConfigTool.
How do I find the default IP address of my CCTV camera?
Answer: You can check:
- The camera/DVR label or manual
- Use IP scanning tools like Angry IP Scanner
- Brand-specific software (e.g., SADP, ConfigTool)
What should I do if I forgot my login credentials?
Answer: Most brands offer a reset method via:
- Physical reset button
- Special software tool
- Email verification with proof of purchase
Is it safe to keep using default login credentials?
Answer: No. Default credentials are well-known and easily exploitable. Change them during the first setup.
📌 Conclusion
Understanding and accessing default login credentials is essential for any CCTV installation. Bookmark this guide or share it with your team for quick reference. And remember—always secure your system by changing default settings.